eMASS system reduces the vibration of steel strip in the plating process of hot dip galvanizing lines in a non-contact manner through use of electromagnets.
Application of eMASS sytem leads to less zinc needing to be used in plating.
The eMASS is installable on air knife units used to blow off any zinc attached to a steel strip in a zinc pot. The control device suppresses any vibration of the steel strip via the attraction of electromagnets and thus minimizes any quantity variations in the plated zinc.
The electromagnets are placed in pairs symetric the steel strip, with each of the pairs being independently controlled. The device can therefore also be used to correct any warping in steel strip.
Applicable materials |
Any ferroelectromagnetic steel strip |
|
Strip thickness |
0.35~3mm |
|
Strip width |
200~2000mm |
|
Strip speed |
0~200m/min |