Hydraulic controller is equipped with a pressure sensitive part that directly receives the necessary control signals and is a stand-alone machine which does not depend on any other devices for operation onsite.
Hydraulic oil pressure generated in a hydraulic pump is discharged through a jet pipe (hydraulic pressure jet pipe relay mechanism). Upon receiving a specific signal the pressure sensitive part shakes the jet pipe through which hydraulic pressure oil is delivered to the cylinder, thus moving the cylinder rod in and out. The operating axis connected to the cylinder rotates and moves in a straight line. Any type of need can be satisfied by combining one of the various different types of actuators with one of the various different types of pressure sensitive parts.
Type |
COP1 |
COP2 |
COP22 |
Applicable pressure (MPa) |
1.5 |
1.5 |
1.5 |
Operating force (N·m) |
343~490 |
892~1226 |
1245~1706 |
Operation axis rotation angle (degrees) |
80+-1.2 |
80+-1.2 |
80+-1.2 |
Operation time without load (s) |
12 |
14 |
19 |
Required oil quantity () |
24 |
24 |
24 |
Type |
COP313 |
COP316 |
COP320 |
Applicable pressure (MPa) |
1.5 |
1.5 |
1.5 |
Operating force (N·m) |
1677~2726 |
4197~5972 |
6982~10179 |
Operation axis rotation angle (degrees) |
90+-3 |
90+-3 |
90+-3 |
Operation time without load (s) |
12 |
26 |
45 |
Required oil quantity () |
52 |
68 |
72 |
Type |
COP4-Y51 |
COP4-Y52 |
COP4-Y26 |
Applicable pressure (MPa) |
1.3 |
1.3 |
1.3 |
Operating force (N·m) |
642 |
319 |
4903 |
Operation axis rotation angle (degrees) |
22+-0.4 |
45+-0.9 |
- |
Operation axis stroke (mm) |
- | - | 50+-1 |
Operation time without load (s) |
12.5 |
12.5 |
12.5 |
Required oil quantity () |
8 |
8 |
8 |
Type |
Method |
Range of applicable pressure |
R-250 type |
Diaphragm type |
1 to 10KPa |
R-BE type |
Bellows type |
0.3 to 2MPa |
R-BO type |
Bourdon tube type |
1.0~10MPa |