Home > Product lineup > Hydraulic controller > Flow control unit [FCU series]

Flow control unit [FCU series]

Support for various controls through a combination of various controllers and valve sizes.
Flow control unit [FCU series]

Various types of actuators can be combined with variety of butterfly valves and different size ball valves. Used of our control valves (flow control and ratio control valves) allows the unit to be used to control the air fuel ratio of burners. The free combination of actuators and valves from the wide variety of sizes and types available allows the units created to be used for almost any application requiring highly accurate flow rate and pressure control.

Features

<Supports large torque and high speed>
Valve can be integrated with an electro-hydraulic actuator, packaged controller and others. If the valve and actuator cannot be combined they are separately installed and connected by linkage.
<Compact>
A small valve that only requires a small amount of torque can be integrated with the CEP series of packaged electric controllers, the EEP series of controller motors or other devices in a compact unit.

Example combinations

Method Drive side Driven side Intended use
Product name Butterfly valve Control valve Cylinder
BV, MD VOP CYL
Hydraulic operation type Electro-hydraulic actuator (HOP)
Used to grow bacteria and filter sludge by supplying air (oxygen) to the filter basin of a sewage plant.
Electro-hydraulic actuator (EOP)
Suction valve used to control the airflow of an aeration blower.
Electro-hydraulic actuator (EOP)
Used to adjust fuel pressure and flow rate as the temperature controller of a cement kiln
Electro-hydraulic actuator (Explosion-proof type)
Used to control gas pressure and airflow in explosive environments such as a chemical plant.
Packaged controller (COP)
(COP)
Used as a blowoff valve of an aeration blower in preventing surges.
Packaged controller (COP)
Used to control the water level of the drum and deaerator of a boiler.
Servo actuator (SOP)
Used to enhance controllability of EOP applications.
Large hydraulic unit
Large unit constructed with a servo valve and others for the required high torque and accuracy at iron and steel facilities and others.

 

Method Drive side Driven side Intended use
Product name Butterfly valve Variable port valve Control valve
BV, MD VOR FCV,FCVD
Electric operation type Electric packaged controller (PEC-50)
Used to control pressure and airflow of small furnace.
Room temperature controller (PECX-10)
Used to control the room pressure of a production line of a pharmaceutical company and animal experiment laboratory.
Control motors (EEP)
Used to control the temperature of lime kilns and heat treat furnaces via voltage contact signals through controlling the fuel flow rate.
Control motors (EEP)
Used as the fuel flow rate control for the steam pressure control of boilers via voltage contact signals.
Positioning motor (CMP)
Used to control the fuel flow rate through controlling the temperature of lime kilns and heat treat furnaces via direct control signals of 4 to 20mADC.
Positioning motor (CMP)
Used to control the fuel flow rate through controlling the steam pressure of boilers via direct voltage contact signals of 4 to 20mADC.

 

Flow control unit [FCU series] Flow control unit [FCU series]

OKAYA SEIRITSU ENGINEERING CO., LTD. Copyright (c) 2010 OKAYA SEIRITSU ENGINEERING CO.,LTD. All Rights Reserved.